IXIA Xcellon Lava AP40/100GE2P 40G/100G Load Module with Transceivers/Adapters

Description

IXIA Xcellon Lava AP40/100GE2P 40G/100G Load Module with Transceivers/Adapters
overall good condition with some scratching to the transceivers/adapters as photographed - module condition as photographic, will have normal wear. Tested in an XM2 chassis, fully functional - all transceivers tested and validated on the system.
listing includes:
1 x
AP40/100GE2P
Xcellon-Lava Dual-Speed, 40/100GE Load Module (Accelerated Performance)
2 x
Cisco/Finisar CFP-100G-SR10
transceivers
1 x
Ixia CFP-to-QSFP+ Dual-Port
(2 x 40G) Interface Adapter
2 x
Ixia CFP-to-QSFP28
(1 x 100G) Interface Adapter
Application note from Ixia ordering guide is below, please read this and understand the limitations of the QSFP28 adapter
Requires IxOS 6.80 or above
948-0029 CFP-to-QSFP28 Interface Adapter Module. A pluggable, 1-port unit that converts an Ixia Xcellon-Lava CFP MSA native port interface to 1-port of 100GE QSFP28. This adapter supports 100GE multimode fiber Active Optical Cable (AOC) media only, Mellanox (942-0092). The adapter is compatible with the Xcellon-Lava 40/100-Gigabit Ethernet, Accelerated Performance, load module (944-1067) and Xcellon-Lava 40/100-Gigabit Ethernet, Reduced Performance, load module (944-1068). Both load modules accept up to two of the QSFP28 Interface Adapter Modules*.
*Note. The CFP-to-QSFP28 Interface Adapter Module does not support: Auto-negotiation, Forward Error Correction, and Link Training on the 100GE link. The maximum length passive copper, DAC to be used with the adapter is 3-meters. The maximum length of multimode fiber media to be used is 30 meters. Ixia recommends the use of the 948-0092 100GBASE-SR4 AOC 3-meter cable with this adapter
No returns unless non-functional, or damaged upon delivery, or fo
r reas
ons that fall within eBay's guarantees/policies