1994-2004 Mustang GT Cobra Black Alloy & Blue Dakota Digital VHX Gauge Kit

Description

1994 to 2004 Ford Mustang Dakota Digital VHX Analog Gauge Kit
Part #
VHX-94F-MUS-K-B
Black Alloy background with Blue lighting.
NOTE:  DOES NOT COME WITH GAUGE BEZEL.  Please contact us if you would like to order one with your gauge kit.
First appearing in 1994, the SN95 Mustang dash was deemed acceptable to carry on all the way to 2004*. With their growing popularity, no doubt spurred on by LS and Coyote conversions, we just couldn’t ignore these cars any longer! Use your stock instrument housing and bezel for installation, and enjoy up-to-date, modern instrumentation that is compatible with nearly any drivetrain - stock or otherwise! Auxiliary readings (think: boost, trans temp and more) can be added and displayed in the LCD message centers.  Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday’s traditional approach to instrumentation. A few of the features which you don’t normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems . Completely engineered and manufactured at our facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry! * Model years ’96-04 using the factory drivetrain may be required to disable the PATS system prior to removing the OEM gauge cluster. Removing the OEM gauge cluster prior to disabling the PATS system may result in a no start condition. Disabling the PATS system is typically done through aftermarket ECU tuning software. If you don’t have access to ECU tuning software you will need to contact your local vehicle performance shop to perform the PATS disable for you.
Analog Gauges
Speedometer
·0 -160 MPH (optional metric version 0- 255 kmh)
Tachometer
·0- 8,000 RPM
Oil Pressure
·0- 80 psi
Water Temperature
·100- 260ºF (optional metric version 40- 120ºC)
Fuel Level
·E, 1/4, 1/2, 3/4, F
Voltmeter
·9- 17 VDC
Lighting
·Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face.
Digital Message Centers
Standard Displays
·Odometer (One time user settable, Million Mile)
·Dual (A/B) Trip Meter (0- 9,999.9)
·Clock (12 hour)
Performance Meters
·0- 60 MPH Timer (0- 100 kmh)
·1/4 mile time
·1/4 mile end speed (trap speed)
·High speed recall
·High RPM recall
Gauges
·Speedometer (0- 255 MPH/kmh)
·Tachometer (0- 9,900 RPM)
·Oil Pressure (0-100 psi displayed in 1 psi increments)
·Water Temperature (100- 300ºF/ 40- 150ºC displayed in 1 ºF/ºC increments)
·Voltmeter (9- 17 VDC)
·Fuel Level (0-99% full)
Lighting
·Auto-contrasting LCD display for optimal view in the brightest of sunlight.
·LED backlit at night to match/ complete the look at night.
Built-in Indicators
Indicators
·Turn Signals (Left/ Right)
·High Beam
·Check Engine
·Parking Brake
·Cruise Control (On/ On & Engaged when vehicle is equipped)
·Gear Position (Optional
GSS-3000
sensor required)
·4 x 4 (When vehicle is equipped)
·Wait to Start (When vehicle is equipped)
**Not all OEM indicator lamp functions will be replaced.
If additional indicators are desired within the new instrument system, consider repurposing any unused indicators to suit your application.
Included Sensors
Water Temperature
·1/8" NPT, ground isolated sensor with a 10 ft harness.
Oil Pressure
·1/8" NPT solid state sensor with a 10 ft harness.
Cable Driven Speed Sensor/ Generator
·Comes with plug to block off stock Speedometer Cable output. Uses stock Ford Speed sensor (see Quick Start Manual for details).
Bushings
·Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.
Calibration
Pushbutton
·Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers.
Please message us with any questions!
We carry a full line of restoration parts for you muscle car!  Message us!
Thank you for taking a look at our Ebay listing!   If you are in the Sacramento area please visit our retail showroom!
ATTN:    We drop ship these gauge kits direct from Dakota Digital. We do the best to predict shipping lead times but there are on occasions it takes longer then we expected.  If you have any special needs or delivery requests.  Please contact us!
ATTN:    AS OF 10/19/20 DAKOTA DIGITAL HAS A CURRENT BUILD LEAD TIME OF 8 TO 12 WEEKS ON A OUT OF STOCK GAUGE KIT.    PLEASE EBAY MESSAGE OR CONTACT US PRIOR TO BUYING ON CURRENT IN STOCK GAUGE KITS and AVAILIBILTY.