100 Ankle Metallic + Screw for Plate Plaster (Tail - Pig) Fischer

Description

Lot of 100 Metal dowel + screw for plasterboard (pigtail dowel)
Metal dowel for plasterboard GKM-S 35 with pan head screw
The self-drilling metal fastener for plasterboard and fiber plasterboard
Advantages
Thanks to the characteristics of its material, the GKM can be installed in plasterboard and fiberglass panels and used with various hooks, screws and pegs. This opens up a wide field of applications.
The self-tapping sharp thread of the GKM allows secure fastening by form locking. A high load capacity is thus achieved.
The cruciform recess allows the use of a screwdriver or a standard pozidrive 2 bit. No special tools are required.
The short length of the dowel requires only a small space at the back of the plate. The GKM can therefore also be used in case of undetermined plate thickness and cavity depth.
Apps
Frames
Lamps
Electrical installation
Furnishing accessories
Materials
Gypsum plasterboard
Plasterboard
The details (construction materials, loads, etc.) of the approval, if available, apply
Working
The GKM is suitable for stand-by assembly.
The GKM self-drilling metal dowel is anchored in the plasterboard plate by form locking.
Flush installation in board material. Avoid overtightening the ankle. The tightening torque must therefore be reduced when using an electric screwdriver.
Suitable for wood, sheet metal and chipboard screws from Ø 4.0 to 5.0 mm.
In the plasterboard panels and the lined plasterboard panels, pre-drill with a Ø 8 mm drill bit.
Not suitable for tiled plasterboard.
Technical data
ankle length
I
31
[mm]
minimum thickness. up to the first supporting layer
you
35
[mm]
Max thickness. of the part to be fixed
you
fixed
12
[mm]
Screw Dimensions
s
xl
s
4.5x35
[mm]
GTIN (EAN code)
4048962012019
Thanks to the characteristics of its material, the GKM can be installed in plasterboard and fiberglass panels and used with various hooks, screws and pegs. This opens up a wide field of applications. The self-tapping sharp thread of the GKM allows secure fastening by form locking. A high load capacity is thus achieved. The cruciform recess allows the use of a screwdriver or a standard pozidrive 2 bit. No special tools are required. The short length of the dowel requires only a small space at the back of the plate. The GKM can therefore also be used in case of undetermined plate thickness and cavity depth. Flush installation in board material. Avoid overtightening the ankle. The tightening torque must therefore be reduced when using an electric screwdriver. In the plasterboard panels and th